Woman in straw hat smiles, holding wine glass near a lake.
Black icon of outdoor patio furniture: couch, potted plant, and a shelter.

Restore the Look Your Pavers Once Had

Professional paver cleaning and sealing services that remove buildup and protect your hardscape in Stuart, Florida.

If your patio, driveway, or pool deck in Stuart has started to look dull or stained, it is likely due to dirt, mold, and algae that build up over time in Florida's humid climate. Pavers lose their color and develop dark streaks as organic matter settles into the surface and joints. Professional cleaning removes that buildup and brings the original color back, while sealing protects the surface and makes future cleaning easier. Cobblestone Pavers And Hardscapes LLC uses pressure washing and commercial-grade sealers to restore and protect paver surfaces across Stuart.

Cleaning starts with a thorough pressure wash that removes dirt, mold, and stains from the paver surface and between the joints. The crew may apply a cleaning solution to break down stubborn stains or organic growth before rinsing. Once the surface is clean and dry, a sealer is applied to lock in the color, reduce weed growth, and create a protective barrier against moisture and UV damage. The sealer also makes the pavers easier to clean going forward because dirt and stains sit on the surface instead of soaking in.

If your pavers in Stuart need attention, reach out to schedule routine maintenance and keep your hardscape looking clean and protected year after year.

What the Cleaning and Sealing Process Involves

Cleaning pavers in Stuart begins with clearing the area of furniture and debris. The crew inspects the surface for loose pavers, low spots, or joint erosion and makes any needed repairs before cleaning. A pressure washer is used to remove dirt, algae, and stains, and the joints are cleared of old sand or debris. You will see the pavers return to their original color as the grime is washed away, especially in shaded or high-moisture areas where mold tends to grow.

After the surface dries completely, which can take 24 to 48 hours depending on weather, sealer is applied using a roller or sprayer. The sealer soaks into the paver surface and forms a protective film that repels water and resists staining. You will notice that the pavers look richer in color and that water beads up on the surface instead of soaking in. Sealed pavers also resist weed growth in the joints and are less prone to erosion or shifting because the sealer helps stabilize the sand.

Your cleaning and sealing service may also include joint re-sanding if the sand has washed out or settled over time. Some sealers add a wet look or gloss finish, while others maintain a natural matte appearance. The type of sealer used depends on your preference and the level of protection your pavers need. Most sealers last two to three years before reapplication is needed, and regular cleaning between sealings helps maintain the appearance and integrity of your hardscape.

Things homeowners ask about paver maintenance

Before scheduling cleaning and sealing, homeowners in Stuart often want to know how the process works, how long it lasts, and what kind of ongoing care their pavers will need afterward.

Black check mark inside a black circle.
How often should pavers be cleaned and sealed?
Most pavers should be cleaned and sealed every two to three years depending on sun exposure, foot traffic, and weather conditions. Cobblestone Pavers And Hardscapes LLC recommends cleaning annually in Stuart and resealing when water stops beading on the surface.
Check mark icon in a circle.
What does sealing actually do for pavers?
Sealing protects pavers from moisture, UV fading, and staining by creating a barrier on the surface. It also stabilizes joint sand, reduces weed growth, and makes the pavers easier to clean by preventing dirt from soaking into the porous material.
Checkmark icon inside a circle.
Why do pavers turn dark or stained over time?
Pavers darken due to mold, algae, and dirt that accumulate in Florida's humid climate. Organic growth settles into the porous surface and thrives in shaded or damp areas, which is why routine cleaning is especially important for homes in Stuart.
Checkmark symbol in a black circle.
How long does it take for sealed pavers to dry?
Sealed pavers are usually dry to the touch within a few hours, but you should avoid heavy use or furniture placement for 24 to 48 hours to allow the sealer to cure fully. Rain during this period can affect the finish, so the crew schedules around the forecast.
A check mark inside a black circle.
What happens if I do not seal my pavers?
Unsealed pavers absorb moisture, fade faster, and are more likely to stain or grow weeds in the joints. They also lose sand more quickly, which can lead to shifting or unevenness over time, especially in high-traffic or exposed areas.

If your pavers in Stuart have lost their color or developed stains, Cobblestone Pavers And Hardscapes LLC can clean and seal them to restore their appearance and protect them from future damage. Contact us to schedule maintenance and keep your patio, driveway, or pool deck looking clean and well cared for.